PV801含氟型石材环保防护剂

产品描述 Product Description

含氟化合物常常会表现出一些难以置信的现象,这是源自氟元素无以伦比的电负性。比如,在氟碳链上的氟原子由于其强大的电负性,使其在与碳原子成键后,几乎完全成为闭壳电子结构,具有最低的极化率,这就如同在碳链上附着了一层不动的惰性气体层。如此,氟碳链几乎对所有的范德华力都是惰性的,导致了令人惊叹的既憎水,又憎油的特点。正是利用这个特点,中美友拓的含氟防水剂,就如同为石材穿上了一层贴身的,紧密的,惰性的,不流动的气体分子内衣,使得石材表面既防水,防油,防污,防老化等一系列,表现出超疏水的特点,也就是水滴会弹离石材表面。这样的技术会提升石材装饰到一个“会当凌绝顶,一览众山小”的登峰造极的档次。

Fluorinated compounds often exhibit usual phenomena resulting from the peerless electronegativity of F atoms. For example, F atoms on fluoralkyl chains have a close-shell electron configuration with the lowest polarizability (0.56×10-24 cm3), just like a layer of immobilized noble gas surrounding the carbon spine. As such, fluoroalkyls appear nearly inert to any van der Waals interactions, leading to their amazing exhibition of both hydrophobic (water repellent)and lipophobic (oil repellent) properties. Taking the advantage of such properties of fluorine, the fluoro-type PV-protect Environmental Stone Protectants provides stone a touching care with an inert, immobolzed and compact layer of pseudo-air vest. As such, stone surface exhibits superhydrophobic (water droplets bounce off the surface), oil-proof, anti-aging, anti-fouling properties. Tis product offers stone industry a peerless and superior care and decoration technology.

适用范围:Application

所有石材/All kinds of stone

主要成分:Major composition

基于PV光触媒的溶剂型纳米硅基化合物为主要材料

solvent nano-silicon compounds based on PV-photocalalyst

产品特性:Property

外观:无色透明水性液体

Appearance:Transparent water-based liquid

比重:0.73~0.79

Density: 0.73~0.79

参考用量:(m2/L)5-30 

Reference Amount:5-30 m2/L

防污性:☆☆☆☆☆

Anti-stain Ability

防水性:☆☆☆☆☆     

Waterproof Ability

耐候性:☆☆☆☆☆     

Weather Resistance Ability

产品包装 Package

产品包装:5L/桶 

Product Package : 5L/bucket  

样品包装:250ml/瓶       

Sample Package: 250ml/bottle

施工方法:Operation Method

1.  施工前,尽量保持石材的干燥和清洁,并使施工场所处于良好的通风。

2.  将防护剂用喷雾器喷涂或毛刷直接刷涂于石材表面。涂刷过程中,横竖涂刷,避免遗漏,多次涂刷效果更佳。每公升防护剂可处理石材10-30平方米(具体视石材吸收率及表面情况而定)。对吸收率特大的石材可进行再次涂刷,但前提必须在待石材表面完全干燥后进行。

3.  本产品的防水效果在6小时后开始显现,自然养护5天后防护效果达到最佳。

4.  本产品也可在低温环境下使用,但须延长养护期。

5.  产品采用密封包装,储存期为2年。

6.  施工完1小时可装箱。

1.  Before operation starts, the surface of stone must be kept dry and clean. The site must be in good ventilation

2.  Use vaporization to spray on the stone surface or brush on it directly. During its brushing process, move the brush from right to left ,top to bottom to avoid missing somewhere, the effect must be better if stone is brushed several times. Every liter of protectant can deal with stone surface 10 to 30 square meters. (The accurate usage amount depends on the absorptivity and condition of stone surface) As for stone surface with specially high absorptivity, brush it again in condition that the stone surface is completely dried after first process.

3.  The waterproof performance appears after 6 hours. The protective effect will be perfect after five-day natural maintenance.

4.  The product can be used under low-temperature environment but there is a need to extend the maintenance period.

5.  Apply sealed package. Have 2-year storage life.

6.  The stone can be encased after the operation finishes for 1 hour.

注意事项:Notes

1.  本产品开封后,不使用时应立即将桶盖拧紧,减少挥发。

2.  注意在施工过程要防止过分暴晒,否则将影响产品的整体效果,阻碍防护剂渗透。

3.  水泥湿贴施工时,建议使用油性产品。

4.  建议对不熟悉的石材可试先做个试验,并让其反应24小时

5.  禁止明火

6.  放置儿童不可触及处。

7.  不放置于高酸环境中,禁止与任何苛刻化学品接触及清洗。

1.  After It's opened , wrench the lid tightly when it isn't in use to reduce volatilization.

2.  Avoid overexposure during its operating process, otherwise, it will affect the overall effect of product.

3.  Advise to adopt oil-based product during wet-paste concrete construction.

4.  As for unfamiliar stone, propose to make a sample test in advance. 24 hours at least for reaction.

5.  No open flames

6.  Be kept out of the reach of children.

7.  Don't put it in high-alkali circumstance. Forbid to touch any kind of harsh chemicals or be washed by it.

数据表下载(右键另存为):

技术数据表 (PDF格式文件)